Oil Seal: NBR, Viton & PTFE article


Type A
  • Additional inner case to reinforce structural rigidity.
  • Suitable for larger diameters and installation from behind.
  • The temperature range is depending on the material.

O.D. Range

Temperature Range

Pressure Range

Velocity

10 - 790 mm

-55ºC - 225ºC

<= 0.3bar(w/spring)

<=10m/s


SA


TA


VA


KA

ดูขนาดต่างๆ

ดูขนาดต่างๆ

   

Type B
  • Outer metal case provides a firm and accurate seat in the housing, but the static sealing on OD is partially limited. 
  • Suitable for steel or case iron housing materials.
  • The temperature range is depending on the material.

O.D. Range

Temperature Range

Pressure Range

Velocity

10 - 790 mm

-55ºC - 225ºC

<= 0.3bar(w/spring)

<=10m/s


SB


TB


VB


KB

ดูขนาดต่างๆ

ดูขนาดต่างๆ

   

Type C
  • Rubber covered OD to increase the OD sealing capability.
  • Suitable for soft alloy, plastic, steel or cast iron housing materials.
  • The temperature range is depending on the material.

O.D. Range

Temperature Range

Pressure Range

Velocity

10 - 790 mm

-55ºC - 225ºC

<= 0.3bar(w/spring)

<=10m/s


SC


TC


VC


KC

ดูขนาดต่างๆ

ดูขนาดต่างๆ

   

Type D
  • Special design of two spring-loaded lips in opposite directions.
  • Designed for applications in which sealing two fluids is required.
  • The temperature range is depending on the material.

O.D. Range

Temperature Range

Pressure Range

Velocity

10 - 790 mm

-55ºC - 225ºC

<= 0.3bar

<=10m/s


DA


DB


DC


DM


Type PA
  • Designed with PTFE (Teflon) bonded sealing lip and hydrodynamic aid.
  • Excellent chemical resistance and temperature capability, and low friction.
  • Suitable for high-speed applications, and when the reductions of under lip running temperature are required.

O.D. Range

Temperature Range

Pressure Range

Velocity

15 - 300 mm

-50ºC - 250ºC

<= 3bar(w/spring)

<=30m/s


PA1


PA2


PA4


PA6


Type PL
  • Designed with PTFE (Teflon) bonded sealing lip.
  • Excellent chemical resistance and temperature capability, and low friction.
  • Suitable for high-speed applications, and when the reductions of under lip running temperature are required.

O.D. Range

Temperature Range

Pressure Range

Velocity

10 - 790 mm

-55ºC - 225ºC

<= 0.3bar(w/spring)

<=10m/s


TA-PL


TB-PL


TC-PL


TM-PL

 ติดต่อรายละเอียดเพิ่มเติม ส่งมาตามแบบฟอร์มอีเมลข้างล่างนี้ หรือ

โทร: 0-2719-7300 โทรสาร: 0-2719-7309 

อีเมล: westbown@truemail.co.th


ชื่อ :  *
บริษัท :  *
โทรศัพท์ :  *
โทรสาร :  *
อีเมล :  *
หัวข้อ :
รายละเอียด :



Sheet Gaskets / Acrylic / RTV Silicone / Flange Seal

Acrylic article
RTV Silicone article
Flange Seal article
Asbestos article
Asbestos/Graphite เสริมไส้ลวด article
Non - Asbestos article
Graphite article
Graphite/316SS Tanged article
Graphite/316SS Plated article
NR (สีดำ หรือ สีขาว) article
NBR (สีดำ หรือ สีขาว) article
Viton (สีดำ) article
EPDM (สีดำ) article
Neoprene (สีดำ) article
Neoprene (สีขาว) article
ยางเสริมผ้าใบ article
ยางเสริมไนล่อน article
PTFE Sheet article
Superlene Sheet article
พลาสติกวิศวกรรม article